10 Mhz (10.000 Khz) VCO (OCXO143-55)

Isotemp 143-55 is voltage controlled 10 MHz OCXO. The non-sinus output signal has amplitude of 4.0V_pp at 5V DC Power. Oscillator is adjusted in the middle of tunning voltage to 2V DC. 

OCXO sizes are 25 x 25 x 15 mm. OCXO surface is heated to +44°C at power 5 Volt DC. 

Power +5V DC at current 450 mA. 

Stability: after 1 hour was difference ±0.00 Hz related to GPS Standard 10 MHz. 

pinout
bottom view	pin	function
	1	tuning voltage 0 - 4 Volt DC ( middle 2.0V DC)
	2	reference voltage output ( 4.19 Volt DC )
	3	power +5V DC
	4	rf output
	5	power 0V, ground, case